DESCRIPTION:

Conductor: Bare, annealed copper per ASTM B33. Class B stranding per ASTM B8.

Sizes: #14 AWG – #10 AWG

Insulation: Extruded flame-retardant cross-linked polyolefin (XLP).

Cable: Conductors cabled together with fillers as needed to form a round core. A binder tape is applied over the core.

Color Code: E1 Per ICEA S-73-532 Table E1 (Old K1)
E2 Per ICEA S-73-532 Table E2 (Old K2)
(See Technical section for color code tables)

Jacket: Flame-retardant, sunlight resistant, Low Smoke, Zero Halogen Polyolefin per UL standard 44, UL Standard 1685 and ICEA S-95-658.

Options: Available with class K stranding per ASTM B174.
Available with class H stranding per ASTM B173.
Available with tinned copper conductors.

Applications / Installation:
Continental's Low Smoke Zero Halogen cable is for use in a broad range of industrial, commercial and utility applications where performance and reliability are required. Used as a 600 volt, multi conductor control cable, it can be installed in free air, in raceways or direct burial. The cable is also approved for wet or dry locations as well as Class 1 Division II industrial hazardous locations per NEC 501-4(b) for (UL) Type tray cables (TC).

Features and Benefits:
Cable produces very low smoke when burned, produces zero halogens during fire and is environmentally safe (sulfur, lead, and halogen free). Jacket is chemical resistant and very flame retardant. Temperature rating of 90°C wet or dry. Insulation provides excellent electrical, thermal, and physical properties, excellent flame resistance and resistant to crush, compression, cuts and heat deformation. Also conductor insulation provides good low temperature (-25°C) cold bend characteristics.

Approvals:
Insulated Conductor: – UL 44 and ICEA S66-524
Cable: – Direct Burial
UL Type TC, 90°C Wet or Dry, 600V
Passes UL 1581 Flame Test (70,000 BTU/hr)

XLP/LSZH Control Cable - Multi Conductor